Glowshift 94-08 Dodge Ram Transmission Test Port Extender Manual de usuario descargar pdf

For Full Warranty Information Visit GlowShift.com

94-08 Dodge Ram Transmission Test Port Extender

1. Wrap the male threads of the 1/8

NPT adapter with Teflon tape to prevent any transmission fluid leaks.

2. Thread the 1/8

NPT adapter into the female side of the test port extender and tighten with a wrench.

3. Once the test port extender and adapter are is together, install the 1/8

NPT temperature sensor into the female

end of the 1/8

NPT adapter.

 Note: Be sure to use Teflon tape on the threads to ensure a tight seal.

4. Remove the bolt that plugs your transmission’s test port; this will be the middle bolt on the passenger’s side.

5. Thread the test port extender with the sensor installed into your transmission’s test port.

 Note: Be sure to use Teflon tape on the threads to ensure a tight seal.

6. Tighten both the test port extender and sensor with a wrench.

7. After the test port extender and temperature sensor is installed be sure to check for leaks.

Pagina 1

For Full Warranty Information Visit GlowShift.com 94-08 Dodge Ram Transmission Test Port Extender 1. Wrap the male threads of the 1/8th NPT adapte

Sin comentarios

Glowshift 94-08 Dodge Ram Transmission Test Port Extender Manual de usuario